Customized Economical PCB Depanelizer Manual For PCB
Detailed Product Description:
1. For electronics, cell phones, computers, PCB, FPC (flexible
printed circuit board),LED.
2. Mold make of SKH-11 Steel,Blade is SKH-9(From Japan),Rigorous
Job!!!!1
Features:
1.Round knife, manually cutting against lower linear knife, for
reduced stress
2.Separate pre-scored PCB assembly without stress on either PCB or
component
3.One touch programming of cut length with digital display
4.Separating speed is adjusted by a rotary knob
5.Handle Intermittent scoring or cut-outs
6.Board with projected component can be cut precisely
7.Large stainless steel platform on both side of cutting blade
prevents board wobble and table height and angle are adjustable
8.Optional PCB conveyor belt to remove finished board9.Clearance between circular and linear blades are adjustable to
fit different groove depth and compensates for blade wear outrrrSpecification:
Model | Dongguan pcb separator machine CWV-1M |
PCB Cutting Length (mm) | 460/700/1000/1500 |
Cutting Speed (mm/s) | manual |
Cutting Thickness (mm) | 0.6~3.5 |
Size (mm) | 400*780*480 |
Weight (Kg) | 55 |
Blade Hardness (HB) | 540~567 |
Blade Hardness (HRC) | 60~63 |
Blade working life for metal (Year) | 0.5 |
Blade working life for PCB (Year) | 1 |
Guarantee (Year) | 1 |
Delivery (Day) | 1 |
Min. Order (Set) | 1 |
Ability (Set) | 1000 |
Technical characteristics:
1. Structural precision, the load evenly, to eliminate internal
stress
2. Safe, easy to operate
3. For electronics, cell phones, computers, PCB, FPC (flexible
printed circuit board)
rrrrrrrrrrrrrrrrOur Advantage :
1.CWVC-1 Pcb depanelizer original manufacturers, price concessions
2.Promise day technical support services
3.Limit the handling of complaints, half an hour back to customers
4.Depanel Experts, the provision of professional PCB sub-programme
5.Reliable machine maker,we get Experts--15,each one got over 6
years experience,equipment quality will be satisfying.
Expanding Reading:
SKH-9:
HB621 HRC63
Dedicated to manufacture the high strength cutting blades. Steel
not only high strength and excellent toughness, but also good wear
resistance. Comparing to the other material that's much more
economical and higher practicality, so it is very wide-range using.
SKH-51 tungsten steel:
HB255 HRC63
Dedicated to manufacture turning tools, drill. It maintain high
hardness at room temperature, however if up to 200 °C hardness
sharp decline, above 500 °C lose metal cutting ability totally.
Titanium Ti:
HB540 HRC55
Dedicated to manufacture aviation sector, aircraft engines,
rockets, missiles, supersonic aircraft structural components. Still
maintain a certain strength, high toughness under high temperature.
Corrosion resistance is extremely strong, and still ensure the
stability of the overall performance of ultra-high temperature.
