Selective Soldering System From China with Full Computer
Control,Highest Flexibility Product Description
1. Solution configuration:
Double-head spray + preheating welding (double cylinders can lift
independently) + preheating welding module (double cylinders can
lift independently) + preheating welding module (double cylinders
can lift independently)
2. Composition:
(1) Spray module: X/Y-2-axis servo-driven spray head movement,
adjustable position, precise positioning, selective precision spray
(double head);
(2) Preheating module: upper hot air/lower infrared preheating.
(3) Welding module: dual-cylinder Z-axis independent lifting.
(4) Direction: left in and right out;
3. Through programming, the spray module selectively and precisely
sprays each solder joint. After preheating by the preheating
module, the welding module selectively spot/drag welds each solder
joint. The welding of each solder joint Parameters can be adjusted
independently;
4. The welding parameters of each solder joint (such as flux spray
volume, welding time, welding wave peak height, etc.) can be set
independently;
5. Full computer control, parameters are set and saved on the
computer, configuration files are generated for easy traceability
and storage, and the welding process is monitored and recorded in
real time
Full computer control, parameters are set and saved on the
computer; configuration files are generated for easy traceability
and storage; real-time monitoring is implemented throughout the
process.
Selective Soldering System From China with Full Computer
Control,Highest Flexibility
1. Precision spray module:
(1) Motion control: X/Y axis servo control;
(2) Positioning accuracy: ±0.2mm;
(3) Spray diameter: 2...8mm (nozzle aperture: 130μm);
(4) Spray method: selective precision point spray or line spray;
(5) Flux pressure tank capacity: 5L;
(6) Number of spray heads: 2PCS
2. Preheating module:
(1) Segmented modular layout;
(2) Preheating is flexible and energy-saving;
(3) Top hot air preheating with good uniformity;
(4) Bottom short-wave infrared preheating, high preheating
efficiency;
(5) Set temperature: room temperature -200℃;
(6) The preheating time and temperature can be set.
3.Welding module
(1) Motion control: X/Y/Z axis servo control;
(2) Positioning accuracy: ±0.15mm;
(3) Tin wave height: 0-5mm controllable, automatic detection and
correction;
(4) The tin wave height calibration interval program can be set;
(5) Tin temperature real-time monitoring and alarm;
(6) Real-time monitoring of liquid level, low liquid level alarm;
(7) Nitrogen protection, very little tin slag;
(8) The nozzle and base are magnetically connected and aligned and
can be quickly replaced;
(9) Tin furnace capacity 11kg;
(10) Maximum soldering temperature: 350 °C;
(11) Electromagnetic pump.
(12) Number of tin furnaces: 2PCS
More information welcome to contact us:
Email: s5@smtfly.com
